T-2608 BULLWHEEL TENSIONER

Leave a Comment / By /

Home | Overhead Equipment: Transmission | T-2608 BULLWHEEL TENSIONER

T-2608 BULLWHEEL TENSIONER

TWO CONDUCTORS, 8,000 LBS. 60 IN. BULLWHEEL TENSIONER

The Sherman+Reilly Revolution Series T-2608 is a bullwheel tensioner built with two pairs of 60 in. 5-groove bullwheels (4 total) and a max tensioning capacity of 8,000 lbs. per sub-conductor or bullwheel. Each bullwheel has its own planetary gearbox and hydraulic motor with spring-applied hydraulic release brake. A precision, microprocessor-controlled motor drive enables inching, even under maximum load.

Download Spec Sheet
Contact Us

KEY FEATURES

CAPABILITY

Two sets of 60 in. 5-groove bullwheels capable of tensioning and pullback up to 8,000 lbs. Low-tension mode allows for fiber optic tensioning. Canted bullwheels for T2 conductor.

HYDRAULIC SYSTEM

Direct drive hydraulic motor and bullwheel. Open center hydraulic configuration, optimized for low-force & synchronized tensioning. Designed to work with up to three compatible tensioners.

DRUM

Hydraulically controls two reel stands.

 

OPERATOR’S STATION

Features a Safe-Zone® Cab for the safety and comfort of the operator with a floor to ceiling polycarbonate front window for excellent visibility and protection. The cab includes climate control, an adjustable ergonomic seat, and all required electronic controls and gauges.

SPECIFICATIONS

Print Specifications
Tensioning Capacity

2,000 lbs.

Maximum Line Speed

Pulling: 4 mph

Drive System

Direct Drive: hydraulic motor,
bullwheel

Drive System Engine

Diesel, 85 Hp, water-cooled with
Webasto Arctic Pack

Bullwheels

Nominal Diameter: 60 in.
Bullwheel Count: 4 ea.
Bullwheel Groove Count: 5 per
Bullwheel Groove Radius: 1 in.
Groove Lining: Polyurethane
Bottom of Groove: 57.75 in. dia.

Tension Brake

Hydraulic, motor-driven

Fuel Capacity

12 Gallons

 

Click Here for all Specs
T-2608-Bullwheel-Tensioner-1

OPTIONS

Solar Battery Charger

 

Leave a Reply

Your email address will not be published. Required fields are marked *