T-1608 Bullwheel Tensioner
ONE CONDUCTOR 8,000 LBS. 60 IN. BULLWHEEL TENSIONER
The Sherman+Reilly® Revolution Series T-1608 Bullwheel Tensioner is built with a single pair of 60 in. 5-groove bullwheels (2 total) and a max tensioning capacity of 8,000 lb. Each bullwheel has its own planetary gearbox and hydraulic motor with spring-applied hydraulic release brake. A precision, microprocessor-controlled motor drive enables inching, even under maximum load.
SPECIFICATIONS
Tensioning Capacity
Min. 600 lbs., max: 8,000 lbs.
Maximum Line Speed
4 mph
Controls
Digital with real-time tension monitoring and recording
Drive System
Direct Drive: hydraulic motor, bullwheel
Drive System Engine
Hydraulic with Webasto Arctic Pack
Bullwheels
Core Diameter: 60 in.
Count: 2 Groove
Count: 5 Groove Radius: 1 in.
Groove Lining: Polyurethane
Bottom of Groove: 57.75 in. dia.
Tension Brake
Hydraulic, motor-driven
Brake Control
Automatic, per operator setting
Engine
72 Hp, Water-Cooled, Deutz TD2.9 L4, T4 Final
Hydraulic Fluid
ISO Grade 32
Hydraulic Reservoir
20 gallon
Fuel Capacity
13.7 gallon
Fail-Safe Brake
Spring-applied, released by hydraulic pressure
Fairlead Rollers
(1) Front and (1) Rear
Operator’s Safety Enclosure
Safe-Zone® Cab, fully-enclosed / single door
OPTIONS
Solar Battery Charger
Air Brakes